Factory Display
ClassifyFactory Display
How to clean and maintain commercial barbecue grills?
Source：本站 Time：2025/6/11 15:26:37 frequency：
1、 Daily cleaning process
Residue pretreatment
Immediately turn off the electronic ignition switch after the barbecue to avoid accidental starting. Use a steel wire ball or cleaning brush to remove large pieces of food residue and coking material from the baking net, grease collection basin, and furnace surface.
Cleaning agent selection
Spray foam cleaner (such as oven cleaner) on the oil stain, let it stand for 1-2 hours to dissolve stubborn oil stain, and then wipe it with wet cloth; The heavy oil area can be soaked in caustic soda solution to disassemble parts (protective gloves are required for operation).
Detail processing
Use toothpicks or steel needles to clean the gaps in the baking net and debris in the micropores of the combustion plate, to prevent blockages and affect thermal efficiency.
2、 Deep maintenance steps
Core component maintenance
After cleaning the grill net, apply edible oil to prevent rust and extend its service life.
Regularly check if the combustion plate is blocked, use steel needles to clear the micropores, and ensure even distribution of heat energy.
Fuel system maintenance
Gas type hanging furnaces need to check the sealing of pipeline interfaces to avoid gas leaks.
Clean the charcoal ash box of the charcoal type hanging furnace to prevent residual carbon slag from corroding the furnace body.
3、 Safety and Storage Standards
Rust and moisture prevention
After cleaning, dry the furnace body and store it in a dry and ventilated place. If it is not used for a long time, it can be covered with a dust cover to isolate moisture.
High temperature component treatment
Avoid wiping with a damp cloth when the furnace head is hot, and clean it after cooling to prevent metal deformation or cracking caused by sudden cooling.
4、 Taboos and Precautions
Prohibited Acts：Do not directly rinse the furnace head or burner with water to avoid short circuits in the circuit or corrosion of the gas pipeline.
Regular maintenance：Check the tightening status of screws every month to avoid deformation of the furnace body or safety hazards caused by looseness.
(It is recommended to perform a deep cleaning once a week for high-frequency commercial scenarios, and it can be extended to once a month for household use)
Previous：nothing
Record number：Lu ICP Preparation2025164534号-1
Technical support：Tiangang Network
